Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Yuneec Breeze 4K Leg Replacement

Cosa ti serve

  1. Yuneec Breeze 4K Leg Replacement, Leg: passo 1, immagine 1 di 1
    • Turn the drone over so the propellers are facing down. Pull the leg up so the leg is pointed up towards the ceiling.

  2. Yuneec Breeze 4K Leg Replacement: passo 2, immagine 1 di 3 Yuneec Breeze 4K Leg Replacement: passo 2, immagine 2 di 3 Yuneec Breeze 4K Leg Replacement: passo 2, immagine 3 di 3
    • Firmly grasp the leg so it is snug between your fingers.

    • As you are grasping the leg, turn the leg counter clockwise about 80-90 degrees and pull up. This should take the leg out of its socket.

    • Pull up so the leg is out of it's socket. Now you can put in the replacement leg.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Wes Knutson

Membro da: 10/04/18

481 Reputazione

3 Guide realizzate

Team

UW Stout, Team S6-G5, Ogden Fall 2018 Membro di UW Stout, Team S6-G5, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G5

4 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 446