Introduzione

Use this guide to replace the trackpad in your Xiaomi Air 12.

  1. Orient the computer so the Xiaomi logo is at the bottom of the device.
    • Orient the computer so the Xiaomi logo is at the bottom of the device.

  2. Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw. Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw. Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
    • Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.

  3. Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise. Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.
    • Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.

  4. Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover. You will hear popping noises as you remove the cover. You will hear popping noises as you remove the cover.
    • Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.

    • You will hear popping noises as you remove the cover.

  5. Remove the back of the laptop by gently lifting the casing upwards. Remove the back of the laptop by gently lifting the casing upwards.
    • Remove the back of the laptop by gently lifting the casing upwards.

  6. Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket. Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket.
    • Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket.

  7. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  8. Remove the 1.5mm screw using the JIS #00 screwdriver. Remove the 1.5mm screw using the JIS #00 screwdriver.
    • Remove the 1.5mm screw using the JIS #00 screwdriver.

  9. Lift the SSD up from the device and gently pull the SSD from the laptop. Lift the SSD up from the device and gently pull the SSD from the laptop.
    • Lift the SSD up from the device and gently pull the SSD from the laptop.

  10. Detach the red wire from the tabs on the perimeter of the metal bracket.
    • Detach the red wire from the tabs on the perimeter of the metal bracket.

  11. Use a PH1 screwdriver to remove the five 2mm black screws. Remove two silver 1mm JIS #00 screws. There will be clear plastic spacers that come off with the silver screws.
    • Use a PH1 screwdriver to remove the five 2mm black screws.

    • Remove two silver 1mm JIS #00 screws.

    • There will be clear plastic spacers that come off with the silver screws.

  12. Lift the battery up and pull out from the device. The metal bracket will come out with the battery. The metal bracket will come out with the battery.
    • Lift the battery up and pull out from the device.

    • The metal bracket will come out with the battery.

  13. Orient the computer so that the trackpad is closest  to you.
    • Orient the computer so that the trackpad is closest to you.

  14. Disconnect the trackpad cable from the motherboard by inserting the plastic opening tool under the white tab of the  connector and pry up the  white tab. Disconnect the trackpad cable from the motherboard by inserting the plastic opening tool under the white tab of the  connector and pry up the  white tab.
    • Disconnect the trackpad cable from the motherboard by inserting the plastic opening tool under the white tab of the connector and pry up the white tab.

  15. Gently remove the cable by pulling it out from the connector.
    • Gently remove the cable by pulling it out from the connector.

  16. Use a PH1 screwdriver to remove the three 2 mm screws. Use a PH1 screwdriver to remove the three 2 mm screws.
    • Use a PH1 screwdriver to remove the three 2 mm screws.

  17. Lift the top end of the trackpad at a small angle and pull the trackpad out. Lift the top end of the trackpad at a small angle and pull the trackpad out. Lift the top end of the trackpad at a small angle and pull the trackpad out.
    • Lift the top end of the trackpad at a small angle and pull the trackpad out.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Hannah Kwan

Membro da: 18/04/2018

689 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S18-G4, Livingston Spring 2018 Membro di Cal Poly, Team S18-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G4

4 Membri

8 Guide realizzate

Hi. where can i find this touchpad? actually for 13.3 one

Alex Palance - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 28

Tutti i Tempi: 315