Salta al contenuto principale

Xiaomi Air 12 Speaker Replacement

Cosa ti serve

  1. Xiaomi Air 12 Speaker Replacement, Rear Casing: passo 1, immagine 1 di 1
    • Orient the computer so the Xiaomi logo is at the bottom of the device.

  2. Xiaomi Air 12 Speaker Replacement: passo 2, immagine 1 di 3 Xiaomi Air 12 Speaker Replacement: passo 2, immagine 2 di 3 Xiaomi Air 12 Speaker Replacement: passo 2, immagine 3 di 3
    • Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.

  3. Xiaomi Air 12 Speaker Replacement: passo 3, immagine 1 di 2 Xiaomi Air 12 Speaker Replacement: passo 3, immagine 2 di 2
    • Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.

  4. Xiaomi Air 12 Speaker Replacement: passo 4, immagine 1 di 3 Xiaomi Air 12 Speaker Replacement: passo 4, immagine 2 di 3 Xiaomi Air 12 Speaker Replacement: passo 4, immagine 3 di 3
    • Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.

    • You will hear popping noises as you remove the cover.

  5. Xiaomi Air 12 Speaker Replacement: passo 5, immagine 1 di 2 Xiaomi Air 12 Speaker Replacement: passo 5, immagine 2 di 2
    • Remove the back of the laptop by gently lifting the casing upwards.

  6. Xiaomi Air 12 Speaker Replacement, Speaker: passo 6, immagine 1 di 2 Xiaomi Air 12 Speaker Replacement, Speaker: passo 6, immagine 2 di 2
    • Remove the white and black speaker wires from the black tabs by pulling upwards from the device.

  7. Xiaomi Air 12 Speaker Replacement: passo 7, immagine 1 di 2 Xiaomi Air 12 Speaker Replacement: passo 7, immagine 2 di 2
    • Gently pull the speaker connector out from the connection point using your hand.

  8. Xiaomi Air 12 Speaker Replacement: passo 8, immagine 1 di 3 Xiaomi Air 12 Speaker Replacement: passo 8, immagine 2 di 3 Xiaomi Air 12 Speaker Replacement: passo 8, immagine 3 di 3
    • Remove the left speaker module by pulling the panel up from the device.

    • Repeat the same process for the right speaker module.

    • Left and Right speaker modules are denoted by an "L" and "R" respectively.

    • There will be a slight adhesive underneath the module.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Hannah Kwan

Membro da: 04/18/18

824 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S18-G4, Livingston Spring 2018 Membro di Cal Poly, Team S18-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G4

4 Membri

20 Guide realizzate

6 Commenti

Thanks for the tutorial! But where can i buy replacement speakers? My right speaker is overdriving all the time now, giving me a lot of loud buzz noises.

Nicolai - Replica

The same for me. I’d like to replace the speakers because one of them is “crackling/vibrating”, but i don’t know where to buy them…

Maniac 45 - Replica

same problem, mine at >50% vibrating very bad

isman87 - Replica

have you found them? i need those too

Giorgio Pianesi -

Hello, i love this laptop and its been my companion for almost 3 years think the audio input jack got grounded because i heard a creaking sound when i inserted a metallic headset jack, the device was charging when it happened. Now the audio output from the audio jack port is like a minus one or somewhat instrumental. Any suggestions what to do?

James Prae Liclican - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 9

Tutti i Tempi: 1,012