Introduzione

Use this guide to replace the SSD in your Xiaomi Air 12.

Orient the computer so the Xiaomi logo is at the bottom of the device.
  • Orient the computer so the Xiaomi logo is at the bottom of the device.

Aggiungi Commento

Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
  • Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.

Aggiungi Commento

  • Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.

Aggiungi Commento

  • Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.

  • You will hear popping noises as you remove the cover.

Aggiungi Commento

  • Remove the back of the laptop by gently lifting the casing upwards.

Aggiungi Commento

  • Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket.

Aggiungi Commento

  • Remove the 1.5mm screw using the JIS #00 screwdriver.

Aggiungi Commento

  • Lift the SSD up from the device and gently pull the SSD from the laptop.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Hannah Kwan

Membro da: 18/04/2018

662 Reputazione

5 Guide realizzate

Team

Cal Poly, Team S18-G4, Livingston Spring 2018 Membro di Cal Poly, Team S18-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G4

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 20

Ultimi 30 Giorni: 60

Tutti i Tempi: 274