Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

hey guys, today we will solder a new dc jack into a XI electronics tablet

  1. to open the device , You use a isesamo opener . Just pry the device open but be gently and cautious
    • to open the device , You use a isesamo opener .

    • Just pry the device open but be gently and cautious

    • at the second picture you see how the inside looks like.

  2. now gently remove the first connector circkled in red use a toothpick dental tool to open it. or use a small flathead screwdriver or something similar.
    • now gently remove the first connector circkled in red

    • use a toothpick dental tool to open it. or use a small flathead screwdriver or something similar.

  3. remove the second connector. first remove the orange tape by peeling it of. then remove the black thick tape on the connecotr
    • remove the second connector.

    • first remove the orange tape by peeling it of.

    • then remove the black thick tape on the connecotr

  4. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  5. remove the third connecor , it is next to the connecotr in step 3.
    • remove the third connecor , it is next to the connecotr in step 3.

  6. remove the screws of the main board.
    • remove the screws of the main board.

  7. after removing the mainboard , you'll see the missing dc jack. we will solder the dc jack on the main board.
    • after removing the mainboard , you'll see the missing dc jack.

    • we will solder the dc jack on the main board.

    • before you do this, search the internet on how you have to solder !! and use the right tools, dont buy the cheapest tools.

  8. i didn't put pictures or movie on how to solder in this guide, but you will find lots of info on the internet. in the last picture you'll see the new dc jack.
    • i didn't put pictures or movie on how to solder in this guide, but you will find lots of info on the internet. in the last picture you'll see the new dc jack.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Kevin D

Membro da: 02/05/2014

6.423 Reputazione

21 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,999