Aggiusta le tue cose Community Store

Xerox B201 Toner Roller Replacement

Introduzione

One of the most common reasons a printer's cartridge spills ink on the paper or random lines appear on the form is if you manually refill a cartridge or the contacts between the cartridge, and the printer is dirty or obstructed. To fix this problem, you will need to replace the toner roller of your printer.

In this guide, we show you how to replace the toner roller of a Xerox B210 printer with a new one. This guide is also suitable for Xerox B215 B205 B215DNI B205NI B210DNI B215/DNI, B205/NI, and B210/DNI printers.

There are nine straightforward steps to replace the Toner Roller in about 20 minutes. You will need some knowledge on how to use screwdrivers and pliers. You might want to wear gloves since ink powder will spill from the toner cartridge when replacing the toner roller. Prior to beginning this guide, be sure to power off the printer and unplug it from the power source.

Cosa ti serve

  1. Xerox B201 Toner Roller Replacement, Xerox B201 Toner Roller: passo 1, immagine 1 di 3 Xerox B201 Toner Roller Replacement, Xerox B201 Toner Roller: passo 1, immagine 2 di 3 Xerox B201 Toner Roller Replacement, Xerox B201 Toner Roller: passo 1, immagine 3 di 3

    • Start by pressing the rectangular button on the top-front side of your printer.

    • A door will open, exposing two parts on top of each other, the toner cartridge on top and the toner drum on the bottom.

    • Use the handle of toner cartridge to slide it out towards you.

    • You will be working on this particular part.

    Modifica

  2. Xerox B201 Toner Roller Replacement: passo 2, immagine 1 di 3 Xerox B201 Toner Roller Replacement: passo 2, immagine 2 di 3 Xerox B201 Toner Roller Replacement: passo 2, immagine 3 di 3

    • Rotate the toner cartridge so that the handle is facing away from you and the ink roller is facing you.

    • Use the Phillips #0 screwdriver to remove the two 6.5 mm screws on each side of the toner cartridge.

    Modifica

  3. Xerox B201 Toner Roller Replacement: passo 3, immagine 1 di 3 Xerox B201 Toner Roller Replacement: passo 3, immagine 2 di 3 Xerox B201 Toner Roller Replacement: passo 3, immagine 3 di 3

    • On the right side, hold the toner cartridge firmly with one hand, and use your fingers to remove the plastic casing which covers the gearbox.

    • Use a small plier to remove the three white gears from the toner cartridge.

    • Don't remove the two black gears.

    Modifica

  5. Xerox B201 Toner Roller Replacement: passo 4, immagine 1 di 2 Xerox B201 Toner Roller Replacement: passo 4, immagine 2 di 2

    • Remove the plastic casing on the other side of the toner cartridge.

    • Remove the rectangular plastic case, (that protects the toner roller), in the center of the toner cartridge.

    Modifica

  6. Xerox B201 Toner Roller Replacement: passo 5, immagine 1 di 3 Xerox B201 Toner Roller Replacement: passo 5, immagine 2 di 3 Xerox B201 Toner Roller Replacement: passo 5, immagine 3 di 3

    • Rotate the toner cartridge so that the metal line is facing you.

    • The black cylinder is the toner roller.

    • Remove the two white circular spacers on both sides of the toner cartridge.

    • Use pliers to remove them if they are difficult to remove by hand.

    • Hold the end of the right side of the toner roller by the metal rod.

    • Hold the toner cartridge firmly with your other hand and remove the toner roller.

    Modifica

  7. Xerox B201 Toner Roller Replacement: passo 6, immagine 1 di 2 Xerox B201 Toner Roller Replacement: passo 6, immagine 2 di 2

    • Use a clean and dry, lint-free cloth to remove any spilled ink on the outsides of the hopper.

    • Do NOT touch the inside of the toner cartridge with your hand or cloth.

    • Hold the metal ends of the new toner roller and carefully put it back in place.

    • Do NOT touch the toner roller with your hands or a cloth. Use the metal ends on each side of the toner roller.

    Modifica

  8. Xerox B201 Toner Roller Replacement: passo 7, immagine 1 di 2 Xerox B201 Toner Roller Replacement: passo 7, immagine 2 di 2

    • Place the two white circular spacers back on both sides of the toner roller.

    • Place the three white gears back on the right side of the toner roller.

    • Make sure the three white gears are in place, and that they all rotate synchronously.

    Modifica

  9. Xerox B201 Toner Roller Replacement: passo 8, immagine 1 di 3 Xerox B201 Toner Roller Replacement: passo 8, immagine 2 di 3 Xerox B201 Toner Roller Replacement: passo 8, immagine 3 di 3

    • Place the plastic case back on the toner cartridge.

    Modifica

  10. Xerox B201 Toner Roller Replacement: passo 9, immagine 1 di 2 Xerox B201 Toner Roller Replacement: passo 9, immagine 2 di 2

    • Use a Phillips #0 screwdriver to put the four 6.5 mm Phillips #0 screws back in place.

    • Place the toner cartridge back in your printer. You are done!

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

Rami Yamout

Membro da: 06/30/22

224 Reputazione

1 Guida realizzata

Distintivi: 7

+4 altri distintivi

Team

York University, Team M-29, Allen Summer 2022 Membro di York University, Team M-29, Allen Summer 2022

YORK-ALLEN-SU22SMG29

1 Membro

2 Guide realizzate

1Commento della guida

Nice work! I like that you used a clear and a free from distraction background on your photos. Your guide is concise and easy to follow (thanks to your choice of simple words!) Keep up the good work.

LOU ERIKA U MUEGA - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 116

Tutti i Tempi: 831