Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Xbox One S All Digital Edition Plastic Enclosure Replacement

Cosa ti serve

  1. Xbox One S All Digital Edition Plastic Enclosure Replacement, Plastic Enclosure: passo 1, immagine 1 di 3 Xbox One S All Digital Edition Plastic Enclosure Replacement, Plastic Enclosure: passo 1, immagine 2 di 3 Xbox One S All Digital Edition Plastic Enclosure Replacement, Plastic Enclosure: passo 1, immagine 3 di 3
    • Position the iFixit Opening Tool's riveted edge in between the top and bottom cover of the plastic enclosure.

    • Apply downward pressure on the iFixit Opening Tool until the security clip unlocks.

    • Repeat on different points of the plastic enclosure until the bottom cover is removed.

  2. Xbox One S All Digital Edition Plastic Enclosure Replacement: passo 2, immagine 1 di 2 Xbox One S All Digital Edition Plastic Enclosure Replacement: passo 2, immagine 2 di 2
    • Remove the six 50 mm green screws (labeled F1-F6) from the metal chassis using a Torx 10 screwdriver.

    • These screws hold the top cover of the plastic enclosure to the chassis.

  3. Xbox One S All Digital Edition Plastic Enclosure Replacement: passo 3, immagine 1 di 2 Xbox One S All Digital Edition Plastic Enclosure Replacement: passo 3, immagine 2 di 2
    • Apply pressure to peel off the sides of the casing.

    • Separate the metal chassis from the top cover, lifting the back of the chassis up and away from the top cover.

    • The plastic back panel is meant to stay attached to the metal chassis.

  4. Xbox One S All Digital Edition Plastic Enclosure Replacement: passo 4, immagine 1 di 1
    • Flip the metal enclosure so that the fan cover is on top.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jules Hajjar

Membro da: 10/10/19

1.531 Reputazione

8 Guide realizzate

Team

Cal Poly, Team S12-G6, Regan Fall 2019 Membro di Cal Poly, Team S12-G6, Regan Fall 2019

CPSU-REGAN-F19S12G6

4 Membri

25 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 9

Ultimi 30 Giorni: 47

Tutti i Tempi: 2,272