Aggiusta la tua roba Comunità Store

Xbox One Elite Controller (Model 1698) Motherboard Replacement

Cosa ti serve

  1. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Show me the Screws!: passo 1, immagine 1 di 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Show me the Screws!: passo 1, immagine 2 di 2

    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

    Modifica

  2. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Removing the back panel screws: passo 2, immagine 1 di 1

    • Remove the 5 Torx Security Bit (TR9) screws

    Modifica

  3. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: passo 3, immagine 1 di 3 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: passo 3, immagine 2 di 3 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: passo 3, immagine 3 di 3

    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

    Modifica

  5. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Warning Carefully remove the ribbon: passo 4, immagine 1 di 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Warning Carefully remove the ribbon: passo 4, immagine 2 di 2

    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

    Modifica

  6. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Screws on controller motherboard: passo 5, immagine 1 di 1

    • Remove the 2 Torx (T6) screws

    Modifica

  7. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Desolder wires from motherboard: passo 6, immagine 1 di 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Desolder wires from motherboard: passo 6, immagine 2 di 2

    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

    Modifica

  8. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Remove the motherboard: passo 7, immagine 1 di 2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Remove the motherboard: passo 7, immagine 2 di 2

    • Pull up from the "top" side of the controller on the sister board.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

EasyAsABC123

Membro da: 01/22/10

2.407 Reputazione

5 Guide realizzate

Distintivi: 25

+22 altri distintivi

Un commento

50 minutes? half of that tops

glenn.fowell - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 31

Ultimi 30 Giorni: 89

Tutti i Tempi: 16,516