Questa traduzione potrebbe non riflettere gli aggiornamenti più recenti dalla guida originale. Aiuta ad aggiornare la traduzione o visualizza la guida d'origine.
Introduzione
Questa guida ti mostrerà come eseguire la sostituzione del pannello superiore della tua Xbox 360 S.
Cosa ti serve
-
-
Nei seguenti passaggi, rimuoverai la grata superiore, assicurata al pannello dai tredici fermi di plastica mostrati nella foto.
-
-
-
Orienta la console in modo che le parole "XBOX 360" sui lati siano rivolte verso l'alto e il frontalino sia rivolto verso sinistra.
-
Inserire lo spudger di metallo tra lo sfiato superiore e la mascherina superiore vicino al retro della Xbox.
-
Ruota lo spudger verso l´esterno dalla console, facendo leva sul bordo dello sfiato della ventola fino a liberare i due fermagli di plastica.
-
-
-
Inserisci lo spudger tra la grata di sfogo e la cornice superiore, lungo il lato sinistro della console.
-
Nello stesso modo descritto sopra, inizia a far leva sul lato sinistro dello sfiato superiore per staccarlo dalla cornice.
-
Continua a fare leva lungo tutto il lato sinistro per sganciare tutte le clip su questo lato.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the fan vent up from the freed left side to disengage the clips along the right side.
-
Remove the entire fan vent.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
In the following steps, you will be releasing the six clips highlighted in red.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert a metal spudger through the front-most slit on the left edge of the top bezel and between the bottom edge of the clip and the left case, as described above.
-
Simultaneously rotate the spudger away from the console and pull up on the top bezel to free the clip.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the same method described above, free the two remaining clips along the left edge of the top bezel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Grab the entire top panel with your hands, lift up the entire left edge high enough to rest the separated clips on top of the left case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rotate the console so that the rear of the Xbox 360 S is facing to the right, and the right case is facing you.
-
Insert a metal spudger through the rear-most slit on the right edge of the top bezel and between the bottom edge of the clip and the right case.
-
While lifting up on the top bezel with your fingers, rotate the spudger away from the console to free the clip.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
In the same manner as described in the previous steps, release the middle and front clips along the right edge of the top panel.
-
Per rimontare il tuo dispositivo, segui le istruzioni della guida in ordine inverso.
Per rimontare il tuo dispositivo, segui le istruzioni della guida in ordine inverso.
Annulla: non ho completato questa guida.
Altre 23 persone hanno completato questa guida.
Un ringraziamento speciale a questi traduttori:
46%
Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›