Aggiusta la tua roba Comunità Store

Xbox 360 Optical Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

This guide is used as an internal prereq.

  1. Xbox 360 Optical Drive Replacement, Optical Drive: passo 1, immagine 1 di 1

    • Peel the silver tape securing the optical drive to the metal casing.

    Traduci

  2. Xbox 360 Optical Drive Replacement: passo 2, immagine 1 di 1

    • Slightly lift the optical drive upwards to gain clearance to disconnect the SATA and power connectors located on the backside of the optical drive.

    • Don't try to completely remove the optical drive just yet. Two cables still connect it to the motherboard.

    Traduci

  4. Xbox 360 Optical Drive Replacement: passo 3, immagine 1 di 2 Xbox 360 Optical Drive Replacement: passo 3, immagine 2 di 2

    • Grab the power connector by its cables and pull it straight out of its socket on the optical drive.

    • Disconnect the SATA data connector from its socket on the optical drive by pulling it straight away.

    Traduci

  5. Xbox 360 Optical Drive Replacement: passo 4, immagine 1 di 1

    • Lift the optical drive assembly out of the metal casing.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 13

Tutti i Tempi: 1,696