Salta al contenuto principale

WowWee MiP Robot Tire Replacement

Cosa ti serve

  1. WowWee MiP Robot Tire Replacement, Wheel: passo 1, immagine 1 di 2 WowWee MiP Robot Tire Replacement, Wheel: passo 1, immagine 2 di 2
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  2. WowWee MiP Robot Tire Replacement: passo 2, immagine 1 di 2 WowWee MiP Robot Tire Replacement: passo 2, immagine 2 di 2
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  3. WowWee MiP Robot Tire Replacement: passo 3, immagine 1 di 1
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

  4. WowWee MiP Robot Tire Replacement, Tires: passo 4, immagine 1 di 2 WowWee MiP Robot Tire Replacement, Tires: passo 4, immagine 2 di 2
    • Remove the three 7.7 mm Phillips #1 screws.

  5. WowWee MiP Robot Tire Replacement: passo 5, immagine 1 di 3 WowWee MiP Robot Tire Replacement: passo 5, immagine 2 di 3 WowWee MiP Robot Tire Replacement: passo 5, immagine 3 di 3
    • Separate the rubber tire from the rim.

    • Push the collar out to separate the plastic layers of the wheel.

    • When reassembling, align the groove and the key of the two wheels' halves together.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Un commento

my MiP has plastic over his wheels

Clarrie O'HARE - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 6,030