Aggiusta la tua roba ComunitĂ  Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

WowWee CHiP Robot Dog Ear Replacement

Cosa ti serve

  1. WowWee CHiP Robot Dog Ear Replacement, Battery: passo 1, immagine 1 di 1

    • Place CHiP on its back so that its stomach is facing you.

    Traduci

  2. WowWee CHiP Robot Dog Ear Replacement: passo 2, immagine 1 di 2 WowWee CHiP Robot Dog Ear Replacement: passo 2, immagine 2 di 2

    • There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.

    Traduci

  3. WowWee CHiP Robot Dog Ear Replacement: passo 3, immagine 1 di 2 WowWee CHiP Robot Dog Ear Replacement: passo 3, immagine 2 di 2

    • Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.

    Traduci

  5. WowWee CHiP Robot Dog Ear Replacement: passo 4, immagine 1 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 4, immagine 2 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 4, immagine 3 di 3

    • Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.

    Traduci

  6. WowWee CHiP Robot Dog Ear Replacement, Ear: passo 5, immagine 1 di 2 WowWee CHiP Robot Dog Ear Replacement, Ear: passo 5, immagine 2 di 2

    • Remove the 4 Phillips screws shown.

    Traduci

  7. WowWee CHiP Robot Dog Ear Replacement: passo 6, immagine 1 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 6, immagine 2 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 6, immagine 3 di 3

    • Pull up top part of toy and remove the connecting wires.

    • Unscrew the 2 Phillips head screws. CHiP should be viewed as seen in the third picture.

    Traduci

  8. WowWee CHiP Robot Dog Ear Replacement: passo 7, immagine 1 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 7, immagine 2 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 7, immagine 3 di 3

    • Remove the 4 Phillips screws to separate the head from the body.

    Traduci

  9. WowWee CHiP Robot Dog Ear Replacement: passo 8, immagine 1 di 2 WowWee CHiP Robot Dog Ear Replacement: passo 8, immagine 2 di 2

    • Remove the 4 Phillips screws on back of the head, and pull off the casing for the back of the head.

    Traduci

  10. WowWee CHiP Robot Dog Ear Replacement: passo 9, immagine 1 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 9, immagine 2 di 3 WowWee CHiP Robot Dog Ear Replacement: passo 9, immagine 3 di 3

    • Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un commento

It’s almost a disassembly, probably quite hard to do. I did disassemble a MiPosaur, but some parts broke off. (!!!)

Michael Deitz - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,471