Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip over the pitcher to expose the base of the blade assembly.
-
Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a pair of pliers, pull of the drive shaft coupling.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Push the blade assembly into the jar.
-
Remove the blades from the device.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.