Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Wolf Gourmet WGBL100S Blades Replacement

Cosa ti serve

  1. Wolf Gourmet WGBL100S Blades Replacement, Blender Blades: passo 1, immagine 1 di 1
    • Flip over the pitcher to expose the base of the blade assembly.

    • Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.

    • Apply a solvent to remove adhesive if necessary.

  2. Wolf Gourmet WGBL100S Blades Replacement: passo 2, immagine 1 di 1
    • Using a pair of pliers, pull of the drive shaft coupling.

  3. Wolf Gourmet WGBL100S Blades Replacement: passo 3, immagine 1 di 2 Wolf Gourmet WGBL100S Blades Replacement: passo 3, immagine 2 di 2
    • Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.

  4. Wolf Gourmet WGBL100S Blades Replacement: passo 4, immagine 1 di 1
    • Remove the nut using a crescent wrench.

  5. Wolf Gourmet WGBL100S Blades Replacement: passo 5, immagine 1 di 1
    • Push the blade assembly into the jar.

    • Remove the blades from the device.

    • Be careful not to cut yourself when handling the blades.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Luke Kutz

Membro da: 04/19/18

354 Reputazione

3 Guide realizzate

Team

Cal Poly, Team S25-G16, Maness Spring 2018 Membro di Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 Membri

5 Guide realizzate

Un commento

Can anyone advise where to buy replacement blade

Nikki Turturro - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 770