Salta al contenuto principale

Wolf Gourmet WGBL100S Blades Replacement

Cosa ti serve

  1. Wolf Gourmet WGBL100S Blades Replacement, Blender Blades: passo 1, immagine 1 di 1
    • Flip over the pitcher to expose the base of the blade assembly.

    • Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.

    • Apply a solvent to remove adhesive if necessary.

  2. Wolf Gourmet WGBL100S Blades Replacement: passo 2, immagine 1 di 1
    • Using a pair of pliers, pull of the drive shaft coupling.

  3. Wolf Gourmet WGBL100S Blades Replacement: passo 3, immagine 1 di 2 Wolf Gourmet WGBL100S Blades Replacement: passo 3, immagine 2 di 2
    • Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.

  4. Wolf Gourmet WGBL100S Blades Replacement: passo 4, immagine 1 di 1
    • Remove the nut using a crescent wrench.

  5. Wolf Gourmet WGBL100S Blades Replacement: passo 5, immagine 1 di 1
    • Push the blade assembly into the jar.

    • Remove the blades from the device.

    • Be careful not to cut yourself when handling the blades.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Luke Kutz

Membro da: 04/19/18

354 Reputazione

3 Guide realizzate

Team

Cal Poly, Team S25-G16, Maness Spring 2018 Membro di Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 Membri

5 Guide realizzate

Un commento

Can anyone advise where to buy replacement blade

Nikki Turturro - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 16

Tutti i Tempi: 765