Salta al contenuto principale

Introduzione

If your wireless LAN card is damaged or broken or you're having trouble connecting to WiFi with your laptop, replace Wireless LAN card using this guide.

  1. Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop. Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.
    • Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.

  2. Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it. Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.
    • Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.

  3. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  4. Use the tweezers to remove the two connecting wires.
    • Use the tweezers to remove the two connecting wires.

  5. Using the Phillips #1 screwdriver, remove the two 2.5mm screws holding down the card.
    • Using the Phillips #1 screwdriver, remove the two 2.5mm screws holding down the card.

  6. Lift and pull the Wireless LAN card away from the computer.
    • Lift and pull the Wireless LAN card away from the computer.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Armani Tayeh

Membro da: 19/03/2018

411 Reputazione

4 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 67