Salta al contenuto principale

Wii U GamePad Outer Case Replacement

Cosa ti serve

  1. Wii U GamePad Outer Case Replacement, Battery: passo 1, immagine 1 di 1
    • Place Gamepad face down and remove the two 4.7 mm screws with a Phillips size #00 screwdriver.

  2. Wii U GamePad Outer Case Replacement: passo 2, immagine 1 di 1
    • Lift and remove the battery plate.

  3. Wii U GamePad Outer Case Replacement: passo 3, immagine 1 di 3 Wii U GamePad Outer Case Replacement: passo 3, immagine 2 di 3 Wii U GamePad Outer Case Replacement: passo 3, immagine 3 di 3
    • With your finger, press down and pull back on the battery connector plug.

    • Remove the battery from the battery case.

  4. Wii U GamePad Outer Case Replacement, Outer Case: passo 4, immagine 1 di 3 Wii U GamePad Outer Case Replacement, Outer Case: passo 4, immagine 2 di 3 Wii U GamePad Outer Case Replacement, Outer Case: passo 4, immagine 3 di 3
    • Remove 10 9mm screws with Tri-Wing size Y1 screwdriver around the outer case.

    • Lift up on the back of case.

    • Lift gently because the rumble motor in the back of the case is still connected by a cable to the motherboard.

  5. Wii U GamePad Outer Case Replacement: passo 5, immagine 1 di 1
    • Unplug outer case rumble motor connector from the motherboard with your fingers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Team

USF Tampa, Team 1-6, Sullivan Spring 2016 Membro di USF Tampa, Team 1-6, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G6

4 Membri

40 Guide realizzate

2 Commenti

This doesn't show anything about taking the front of the housing off, is that relatively straightforward?

Will Prosser - Replica

This doesn't show anything about the L and R sticks like moving on its own when i play, do you how to fix that?

Victoria Gonzalez - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 41

Ultimi 30 Giorni: 189

Tutti i Tempi: 6,440