Aggiusta la tua roba Comunità Store

Wii U GamePad Motherboard Replacement

Introduzione

This guide will help you to replace your motherboard. For this replacement, You will need the tool #PH0 and tweezers.

Cosa ti serve

  1. Wii U GamePad Motherboard Replacement, Battery: passo 1, immagine 1 di 1

    • Place Gamepad face down and remove the two 4.7 mm screws with a Phillips size #00 screwdriver.

    Traduci

  2. Wii U GamePad Motherboard Replacement: passo 2, immagine 1 di 1

    • Lift and remove the battery plate.

    Traduci

  3. Wii U GamePad Motherboard Replacement: passo 3, immagine 1 di 3 Wii U GamePad Motherboard Replacement: passo 3, immagine 2 di 3 Wii U GamePad Motherboard Replacement: passo 3, immagine 3 di 3

    • With your finger, press down and pull back on the battery connector plug.

    • Remove the battery from the battery case.

    Traduci

  4. Wii U GamePad Motherboard Replacement, Outer Case: passo 4, immagine 1 di 3 Wii U GamePad Motherboard Replacement, Outer Case: passo 4, immagine 2 di 3 Wii U GamePad Motherboard Replacement, Outer Case: passo 4, immagine 3 di 3

    • Remove 10 9mm screws with Tri-Wing size Y1 screwdriver around the outer case.

    • Lift up on the back of case.

    • Lift gently because the rumble motor in the back of the case is still connected by a cable to the motherboard.

    Traduci

  5. Wii U GamePad Motherboard Replacement: passo 5, immagine 1 di 1

    • Unplug outer case rumble motor connector from the motherboard with your fingers.

    Traduci

  6. Wii U GamePad Motherboard Replacement, WiFi: passo 6, immagine 1 di 3 Wii U GamePad Motherboard Replacement, WiFi: passo 6, immagine 2 di 3 Wii U GamePad Motherboard Replacement, WiFi: passo 6, immagine 3 di 3

    • Open the top and bottom clasp that connects the white flex cable to the motherboard with the tweezer.

    • Remove the white flex cable with the tweezers.

    Traduci

  8. Wii U GamePad Motherboard Replacement: passo 7, immagine 1 di 2 Wii U GamePad Motherboard Replacement: passo 7, immagine 2 di 2

    • With your fingers, lift and remove WiFi board.

    • Remove the board carefully as there are still two wires attached.

    Traduci

  9. Wii U GamePad Motherboard Replacement: passo 8, immagine 1 di 2 Wii U GamePad Motherboard Replacement: passo 8, immagine 2 di 2

    • Disconnect the black and white wires off of the back of the WiFi module.

    Traduci

  10. Wii U GamePad Motherboard Replacement: passo 9, immagine 1 di 1

    • Lift and remove the WiFi module.

    Traduci

  11. Wii U GamePad Motherboard Replacement, Speakers: passo 10, immagine 1 di 2 Wii U GamePad Motherboard Replacement, Speakers: passo 10, immagine 2 di 2

    • With your fingers, unplug the left speaker cable from the motherboard.

    Traduci

  12. Wii U GamePad Motherboard Replacement: passo 11, immagine 1 di 2 Wii U GamePad Motherboard Replacement: passo 11, immagine 2 di 2

    • Remove the right speaker cable that's connected to the motherboard with the tweezers.

    Traduci

  13. Wii U GamePad Motherboard Replacement, Motherboard: passo 12, immagine 1 di 1

    • Disconnect the analog connector with tweezers.

    Traduci

  14. Wii U GamePad Motherboard Replacement: passo 13, immagine 1 di 2 Wii U GamePad Motherboard Replacement: passo 13, immagine 2 di 2

    • Remove the blue connector using tweezers.

    Traduci

  15. Wii U GamePad Motherboard Replacement: passo 14, immagine 1 di 2 Wii U GamePad Motherboard Replacement: passo 14, immagine 2 di 2

    • Carefully lift the black clasp. It is prone to breaking if only lifted from one point. Remove the brown ribbon by using the tweezers.

    • Unclasp small gray ribbon to the left of the brown ribbon.

    Traduci

  16. Wii U GamePad Motherboard Replacement: passo 15, immagine 1 di 1

    • Remove the small orange ribbon with the tweezers.

    Traduci

  17. Wii U GamePad Motherboard Replacement: passo 16, immagine 1 di 3 Wii U GamePad Motherboard Replacement: passo 16, immagine 2 di 3 Wii U GamePad Motherboard Replacement: passo 16, immagine 3 di 3

    • Remove these two connectors to the motherboard with your fingers.

    Traduci

  18. Wii U GamePad Motherboard Replacement: passo 17, immagine 1 di 2 Wii U GamePad Motherboard Replacement: passo 17, immagine 2 di 2

    • Remove the NFC communicator.

    • When removing the NFC communicator, be careful with the small connector on the back side.

    • Remove the small connector plug-in on the back.

    Traduci

  19. Wii U GamePad Motherboard Replacement: passo 18, immagine 1 di 3 Wii U GamePad Motherboard Replacement: passo 18, immagine 2 di 3 Wii U GamePad Motherboard Replacement: passo 18, immagine 3 di 3

    • Remove the remaining three 5.1 mm screws using the Phillips size #0 screwdriver.

    • Lift and remove the mother board.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 13 persone hanno completato questa guida.

Autore

con 7 altri collaboratori

Valentina Cerruty

Membro da: 02/10/16

3.345 Reputazione

7 Guide realizzate

Distintivi: 16

+13 altri distintivi

Team

USF Tampa, Team 1-6, Sullivan Spring 2016 Membro di USF Tampa, Team 1-6, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G6

4 Membri

40 Guide realizzate

2 Commenti

i need help with the tiny clasp for the touch glass ribbon. the tiny grey clasp snapped off and now the ribbon will not stay in, so i can't use the touch screen, if there a way to secure that tiny ribbon to the contact?

Roxanne - Replica

How can i see what version off motherboard i need to buy to replace it
I got 30X52504 as number on the board

VillainVibe - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 29

Ultimi 30 Giorni: 185

Tutti i Tempi: 16,009