Salta al contenuto principale

Whirlpool Dryer Power Cord Replacement

Cosa ti serve

  1. Whirlpool Dryer Power Cord Replacement, Safety Precautions: passo 1, immagine 1 di 1
    • Before you begin your repair, unplug your dryer.

    • Your power cord may have four prongs rather than three. The additional prong is a ground connection.

  2. Whirlpool Dryer Power Cord Replacement, Unfasten the cover plate: passo 2, immagine 1 di 1
    • Remove the cover plate screw.

  3. Whirlpool Dryer Power Cord Replacement, Remove the cover plate: passo 3, immagine 1 di 3 Whirlpool Dryer Power Cord Replacement, Remove the cover plate: passo 3, immagine 2 di 3 Whirlpool Dryer Power Cord Replacement, Remove the cover plate: passo 3, immagine 3 di 3
    • Remove the cover plate.

  4. Whirlpool Dryer Power Cord Replacement, Disconnect the cord: passo 4, immagine 1 di 1
    • Remove the screws securing the cord cables.

    • Mark the cables with a permanent marker if needed and take a picture or draw a diagram.

  5. Whirlpool Dryer Power Cord Replacement, Remove the cord: passo 5, immagine 1 di 3 Whirlpool Dryer Power Cord Replacement, Remove the cord: passo 5, immagine 2 di 3 Whirlpool Dryer Power Cord Replacement, Remove the cord: passo 5, immagine 3 di 3
    • Pull the cord carefully down through the round hole.

    • Make sure you replace the connections correctly when you reassemble.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Ask our Answers community for help.

Bill Gilbert

Membro da: 06/30/22

30.088 Reputazione

213 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

17.420 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 22

Ultimi 30 Giorni: 67

Tutti i Tempi: 279