Aggiusta la tua roba Comunità Store

Wexford CT-166TF Plastic Casing Replacement

Introduzione

This guide will show you how to remove the plastic casing so that it can be replaced.

Cosa ti serve

  1. Wexford CT-166TF Plastic Casing Replacement, Settings Knob: passo 1, immagine 1 di 1

    • Locate the knob at the top of the fan.

    Modifica

  2. Wexford CT-166TF Plastic Casing Replacement: passo 2, immagine 1 di 1

    • Remove the knob by gripping it and pulling straight up. Use a spudger if it is difficult to grip.

    • When reassembling, be sure to align the bottom of the new knob and the turning mechanism in the fan before pushing down.

    Modifica

  3. Wexford CT-166TF Plastic Casing Replacement, Plastic Casing: passo 3, immagine 1 di 1

    • Using the plastic opening tool, turn the device over and remove the black plastic covers over the four screw holes.

    Modifica

  4. Wexford CT-166TF Plastic Casing Replacement: passo 4, immagine 1 di 2 Wexford CT-166TF Plastic Casing Replacement: passo 4, immagine 2 di 2

    • Remove the four screws underneath the plastic covers.

    Modifica

  6. Wexford CT-166TF Plastic Casing Replacement: passo 5, immagine 1 di 2 Wexford CT-166TF Plastic Casing Replacement: passo 5, immagine 2 di 2

    • Remove 5 smaller screws visible through small holes between the base and the casing.

    Modifica

  7. Wexford CT-166TF Plastic Casing Replacement: passo 6, immagine 1 di 2 Wexford CT-166TF Plastic Casing Replacement: passo 6, immagine 2 di 2

    • Remove four screws on the back, two near the top and two near the bottom.

    Modifica

  8. Wexford CT-166TF Plastic Casing Replacement: passo 7, immagine 1 di 1

    • Pull off the back casing.

    Modifica

  9. Wexford CT-166TF Plastic Casing Replacement: passo 8, immagine 1 di 2 Wexford CT-166TF Plastic Casing Replacement: passo 8, immagine 2 di 2

    • Remove the 2 screws that attach the front part of the casing to the motor.

    Modifica

  10. Wexford CT-166TF Plastic Casing Replacement: passo 9, immagine 1 di 2 Wexford CT-166TF Plastic Casing Replacement: passo 9, immagine 2 di 2

    • Remove the two middle screws attaching the black plastic cover to the front .

    Modifica

  11. Wexford CT-166TF Plastic Casing Replacement: passo 10, immagine 1 di 1

    • Remove the two screws attached to the white bar near the red light on the top of the front casing.

    Modifica

  12. Wexford CT-166TF Plastic Casing Replacement: passo 11, immagine 1 di 1

    • Remove the two screws keeping the button attached to the top of the casing.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Cameron Mattson

Membro da: 04/05/17

101 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

UW Tacoma, Team S3-G4, Liner Spring 2017 Membro di UW Tacoma, Team S3-G4, Liner Spring 2017

UWT-LINER-S17S3G4

4 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 328