Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement

Introduzione

Battery replacement is recommended every 300 charge cycles. Use this guide to replace the battery in your 6000 series Welch Allyn Connex Vital Signs Monitor.

PLEASE NOTE: This repair guide was developed by the iFixit team based on Welch Allyn's own service manual. Neither iFixit nor this repair guide is endorsed by or affiliated with Welch Allyn.

Cosa ti serve

  1. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement, Stand: passo 1, immagine 1 di 2 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement, Stand: passo 1, immagine 2 di 2

    • Unplug the AC power connection cable.

    Traduci

  2. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 2, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 2, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 2, immagine 3 di 3

    • Place your thumb and forefinger on the blood pressure (NIBP) hose connector. Squeeze the side tabs until the connector releases.

    • Always grasp the hose by the connector. Do not pull on the hose itself.

    • Pull the connector away from the connector port.

    Traduci

  3. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 3, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 3, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 3, immagine 3 di 3

    • Place your thumb and forefinger on the Pulse oximetry (SpO2 or combined SpO2/SpHb) cable connector. Squeeze the side tabs until the connector releases.

    • Always grasp the cable by the connector. Do not pull on the cable itself.

    • Pull the connector away from the connector port.

    Traduci

  4. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 4, immagine 1 di 2 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 4, immagine 2 di 2

    • Grasp the temperature probe and pull it up to remove it from the monitor.

    Traduci

  6. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 5, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 5, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 5, immagine 3 di 3

    • Remove the cover of the temperature module by pressing the tab and sliding the cover to the right.

    Traduci

  7. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 6, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 6, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 6, immagine 3 di 3

    • Depress the spring tab on the temperature probe cable connector and withdraw it from the probe port.

    Traduci

  8. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 7, immagine 1 di 1

    • Remove the flathead screw on the USB networking door.

    • Loosen the captive Phillips #2 screw securing the monitor to the stand.

    Traduci

  9. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 8, immagine 1 di 1

    • Holding the monitor securely, open the USB networking door.

    • You may have to lift the monitor slightly to allow the door to swing out from the stand mount.

    Traduci

  10. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 9, immagine 1 di 2 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 9, immagine 2 di 2

    • Detach any accessory USB cables from USB ports on the monitor.

    Traduci

  11. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 10, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 10, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 10, immagine 3 di 3

    • Slide the monitor off of the stand tray.

    Traduci

  12. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement, Battery: passo 11, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement, Battery: passo 11, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement, Battery: passo 11, immagine 3 di 3

    • Place the monitor upside down on a clean surface.

    • Insert a coin into the slot and push to open.

    • Choose a coin that fits comfortably into the slot.

    • Remove the battery cover.

    Traduci

  13. Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 12, immagine 1 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 12, immagine 2 di 3 Welch Allyn Connex Vital Signs Monitor 6000 Battery Replacement: passo 12, immagine 3 di 3

    • Use the plastic label to remove the battery from its recess.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

kyle2

Membro da: 06/03/10

101 Reputazione

1 Guida realizzata

Distintivi: 3

Team

Team Freedom Membro di Team Freedom

Community

1 Membro

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 30

Tutti i Tempi: 2,760