Salta al contenuto principale

Introduzione

I am going to show you how to replace your watch battery and show you how to preserve the life of your new watch battery.

Parti

Nessuna parte specificata.

  1. For this project you will need the watch you are replacing the battery on, the new battery and a mini flat head screwdriver. For this project you will need the watch you are replacing the battery on, the new battery and a mini flat head screwdriver.
    • For this project you will need the watch you are replacing the battery on, the new battery and a mini flat head screwdriver.

  2. You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch. You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch. You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch.
    • You will need to take the back of the watch off. To do this you will turn the watch over to the back side and look carefully for a small groove opening. This is where you will use the mini flat head screwdriver. Insert the flat head screwdriver into the groove and pop the back off of the watch.

  3. Take the white plastic ring out of the watch. You can use the mini flat head screwdriver or your finger to pull it out. Take the white plastic ring out of the watch. You can use the mini flat head screwdriver or your finger to pull it out.
    • Take the white plastic ring out of the watch. You can use the mini flat head screwdriver or your finger to pull it out.

  4. Take the old battery out of the watch. You can use the mini flat head screwdriver to do this. Take the old battery out of the watch. You can use the mini flat head screwdriver to do this. Take the old battery out of the watch. You can use the mini flat head screwdriver to do this.
    • Take the old battery out of the watch. You can use the mini flat head screwdriver to do this.

  5. Put the new battery in watch. Use your fingers to insert the new battery.
    • Put the new battery in watch. Use your fingers to insert the new battery.

  6. Use your fingers to insert the plastic white ring back into the watch.
    • Use your fingers to insert the plastic white ring back into the watch.

  7. Put the back of the watch on using your fingers. Press down so that you hear a snap to ensure the back is on properly.
    • Put the back of the watch on using your fingers. Press down so that you hear a snap to ensure the back is on properly.

  8. You are all done and can now set the time on your watch.
    • You are all done and can now set the time on your watch.

  9. When you are not using the watch, pull the pin out to stop the watch from running When you are not using the watch, pull the pin out to stop the watch from running
    • When you are not using the watch, pull the pin out to stop the watch from running

  10. When the pin is pulled out, the battery is not being used. Only push the pin in and set the time when you are using the watch. This will preserve the life of your new battery.
    • When the pin is pulled out, the battery is not being used. Only push the pin in and set the time when you are using the watch. This will preserve the life of your new battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

TIMONTE HUNTER

Membro da: 02/03/2016

337 Reputazione

1 Guida realizzata

Team

First time I have done this and I have somehow lost the white plastic! Is this essential?

barbaramcraig - Replica

Yes. I can’t get the plastic spacer back in right. I guess that is why I can’t get the back.

jybentneedle48 - Replica

I'm trying to figure out the type of watch that is can anyone help me that? This is the only place I can find an image of it. I recently purchased it private sale and they couldn't remember.

karmstrong20112012 - Replica

Googling the model number on the back, LDC74709W, leads me to believe it’s an unbranded watch that was sold at Walmart in the past.

Austin Blakely -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 11

Ultimi 7 Giorni: 68

Ultimi 30 Giorni: 461

Tutti i Tempi: 23,680