Wahl Magic Clip Cordless Stagger Tooth Blade Replacement

Introduzione

The guide will teach you how to take apart, replace, and reassemble a Wahl wireless hair clipper. More specifically, we will replace the stagger tooth blade on the clipper. This is vital as materials tarnish over time. This tarnish and worn down will cause more harm than good over time. With this guide, we can ensure that we are staying sanitary and providing good haircuts for ourselves and others.

Cosa ti serve

Passo 1 Stagger Tooth Blade

Wahl Magic Clip Cordless Stagger Tooth Blade Replacement, Stagger Tooth Blade: passo 1, immagine 1 di 2

Wahl Magic Clip Cordless Stagger Tooth Blade Replacement, Stagger Tooth Blade: passo 1, immagine 2 di 2

Turn to assess where the screws are on the clipper.

Traduci

Passo 2

Wahl Magic Clip Cordless Stagger Tooth Blade Replacement: passo 2, immagine 3 di 3

Unscrew both screws.

Traduci

Passo 3

Take off all the parts, ensuring not to lose or misplace them. Take this time to clean your disassembled clipper to remove all the hair.
You should have a blade, stagger tooth blade, and two screws by now set aside.

Traduci

Passo 4

Great you have deep-cleaned your clippers, please place new blades and screws on the table to ensure you have everything you need to reassemble.

Traduci

Passo 5

Wahl Magic Clip Cordless Stagger Tooth Blade Replacement: passo 5, immagine 3 di 3

Place the new blade back in place, align the stagger tooth blade to ensure that the screws will enter back into place; and screw both screws back into place to hold everything in place.
Be very cautious as the blades are sharp

Traduci