Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Wacom Cintiq 24HD Stand Replacement

Cosa ti serve

  1. Wacom Cintiq 24HD Stand Replacement, Stand: passo 1, immagine 1 di 1
    • Unplug any cables from the USB, power, display or DVI-D ports by gripping the cord by the connector and pulling straight out of the port.

    • Unplugging the cables by pulling on the cord or pulling at an angle can damage the cable or connector.

  2. Wacom Cintiq 24HD Stand Replacement: passo 2, immagine 1 di 3 Wacom Cintiq 24HD Stand Replacement: passo 2, immagine 2 di 3 Wacom Cintiq 24HD Stand Replacement: passo 2, immagine 3 di 3
    • Place the device screen down on a flat surface.

    • Remove eight 10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.

  3. Wacom Cintiq 24HD Stand Replacement: passo 3, immagine 1 di 1
    • Lift the stand up and away from the rest of the device so the legs separate from the mounting plate.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team S15-G3, White Fall 2018 Membro di Cal Poly, Team S15-G3, White Fall 2018

CPSU-WHITE-F18S15G3

4 Membri

18 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 20

Tutti i Tempi: 1,963