Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Wacom Cintiq 24HD Power Port Replacement

Introduzione

The power port in the Wacom Cintiq 24HD can fail over time due to overuse. The power port must function in order for the Cintiq to work. This guide will show you how to replace the power port. Soldering skills and tools will be needed for this replacement. iFixit has a guide to soldering which you can find here.

Cosa ti serve

  1. Wacom Cintiq 24HD Power Port Replacement, Stand: passo 1, immagine 1 di 1

    • Unplug any cables from the USB, power, display or DVI-D ports by gripping the cord by the connector and pulling straight out of the port.

    • Unplugging the cables by pulling on the cord or pulling at an angle can damage the cable or connector.

    Traduci

  2. Wacom Cintiq 24HD Power Port Replacement: passo 2, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 2, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 2, immagine 3 di 3

    • Place the device screen down on a flat surface.

    • Remove eight 10mm Phillips #2 screws (four on each leg of the stand) by turning the screwdriver counterclockwise.

    Traduci

  3. Wacom Cintiq 24HD Power Port Replacement: passo 3, immagine 1 di 1

    • Lift the stand up and away from the rest of the device so the legs separate from the mounting plate.

    Traduci

  4. Wacom Cintiq 24HD Power Port Replacement, Back Panel: passo 4, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement, Back Panel: passo 4, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement, Back Panel: passo 4, immagine 3 di 3

    • Remove eighteen 10.2mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.

    • Remove one 11.9mm Phillips #1 screw from the center of the back panel.

    • Remove two 10.2mm Phillips #1 screws from underneath hinged panels in the bottom right and left corners.

    • Our device does not include the cover panels for the USB, DVI-D, and power ports. You must first remove these cover panels shown in green in order to remove the back panel.

    Traduci

  5. Wacom Cintiq 24HD Power Port Replacement: passo 5, immagine 1 di 2 Wacom Cintiq 24HD Power Port Replacement: passo 5, immagine 2 di 2

    • Lift the back panel up by a corner and insert a plastic opening tool in the gap.

    • Slide the tool along the gap around the perimeter of the device while lifting to unlatch the back panel.

    • The latches on the back panel will make loud clicking noises when opening.

    • Remove the panel by lifting it up and off of the device.

    Traduci

  7. Wacom Cintiq 24HD Power Port Replacement, Interior Metal Plate: passo 6, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement, Interior Metal Plate: passo 6, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement, Interior Metal Plate: passo 6, immagine 3 di 3

    • Detach the small black wire connecting the back metal plate to the USB video port by removing the one 8 mm Phillips #2 screw from the back metal plate and turning the screwdriver counterclockwise.

    Traduci

  8. Wacom Cintiq 24HD Power Port Replacement: passo 7, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 7, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 7, immagine 3 di 3

    • Remove the two 8 mm Phillips #2 screws from the metal button plate by rotating the screwdriver counterclockwise.

    • Remove the metal button plate from the back metal plate.

    Traduci

  9. Wacom Cintiq 24HD Power Port Replacement: passo 8, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 8, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 8, immagine 3 di 3

    • Remove the button wires from the support clip by pushing down on the clip.

    • Detach the button wires from the button board by pulling the button wires away from the board.

    • Place the button board back in to the device.

    Traduci

  10. Wacom Cintiq 24HD Power Port Replacement: passo 9, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 9, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 9, immagine 3 di 3

    • Remove the eight (four on each plate) 10.2mm Phillips #2 screws with locking washers from the metal mounting plates by rotating the screwdriver counterclockwise.

    • Remove the two metal mounting plates.

    Traduci

  11. Wacom Cintiq 24HD Power Port Replacement: passo 10, immagine 1 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 10, immagine 2 di 3 Wacom Cintiq 24HD Power Port Replacement: passo 10, immagine 3 di 3

    • Remove the sixteen 8 mm Phillips #2 screws with flanges from the horizontal side of the plate by turning the screwdriver counterclockwise.

    • Remove the ten 8 mm Phillips #2 screws with flanges from the vertical sides of the plate by turning the screwdriver counterclockwise.

    Traduci

  12. Wacom Cintiq 24HD Power Port Replacement: passo 11, immagine 1 di 1

    • Remove the back metal plate by lifting up along one edge , then lifting the plate off and away from the device.

    Traduci

  13. Wacom Cintiq 24HD Power Port Replacement, Power Port: passo 12, immagine 1 di 1

    • Remove the two 7.8mm Phillips #2 screws from the right back panel connected to the power port by turning the screwdriver counterclockwise.

    Traduci

  14. Wacom Cintiq 24HD Power Port Replacement: passo 13, immagine 1 di 2 Wacom Cintiq 24HD Power Port Replacement: passo 13, immagine 2 di 2

    • Lift the power port and attached daughterboard out of the device.

    • Remove the wires from the daughterboard.

    • Pull gently on the wires when removing from the daughterboard to prevent any tearing.

    Traduci

  15. Wacom Cintiq 24HD Power Port Replacement: passo 14, immagine 1 di 2 Wacom Cintiq 24HD Power Port Replacement: passo 14, immagine 2 di 2

    • Remove the two 8 mm Phillips #2 screws from the daughterboard by turning the screwdriver counterclockwise.

    • Detach the metal cover from the power port.

    Traduci

  16. Wacom Cintiq 24HD Power Port Replacement: passo 15, immagine 1 di 2 Wacom Cintiq 24HD Power Port Replacement: passo 15, immagine 2 di 2

    • Desolder the connections the power port connections using a soldering iron.

    • Remove the power port from the daughterboard by lifting it off.

    • iFixit has a guide to soldering which you can find here.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Sydney Hosokawa

Membro da: 10/08/18

284 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

Cal Poly, Team S15-G3, White Fall 2018 Membro di Cal Poly, Team S15-G3, White Fall 2018

CPSU-WHITE-F18S15G3

4 Membri

18 Guide realizzate

7 Commenti

could you give the part, so i can buy it please

jmcl21 - Replica

My 24 HD blue power light comes on and off about once a second, you can hear the fan start and stop. Is a faulty power board the reason or is it the ps block ?

Thomas McGarrity - Replica

Hi,

Can you please tell me whrere I could buy the power port? I'm searching for several days and I couldn't find it.

tonet - Replica

Is there any where I can get this part the circuit board is damaged

Brian O'Kelly - Replica

any information regarding where to buy this component

Mario Romario -

Can anyone tell me what size the capacitors are on the power port daughter board of the original 24HD Touch (DTH2400)?

Anna-Maria Covich - Replica

DigiKey Part Number

2092-KPJXHT-4S-S-ND

Zachary Illingworth - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 26

Tutti i Tempi: 3,180