Aggiusta la tua roba Comunità Store

Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement

Introduzione

Follow this guide to remove the drive belt for the Wacker Compactor Plate VP1550AW 2014.

Cosa ti serve

  1. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: passo 1, immagine 1 di 2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Safety precautions: passo 1, immagine 2 di 2

    • Before you begin, be sure that the engine is powered off and is cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    Modifica

  2. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Loosen the belt guard: passo 2, immagine 1 di 1

    • Use a 1/2" socket and wrench to loosen the two bolts securing the belt guard.

    • The bolts are captive and should not be removed.

    Modifica

  4. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: passo 3, immagine 1 di 2 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the belt guard: passo 3, immagine 2 di 2

    • Remove the belt guard.

    Modifica

  5. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: passo 4, immagine 1 di 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: passo 4, immagine 2 di 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Remove the drive belt: passo 4, immagine 3 di 3

    • Use scissors or a blade to cut the drive belt.

    • Remove the drive belt.

    Modifica

  6. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement, Install a replacement belt: passo 5, immagine 1 di 1

    • Loop the replacement belt onto the small pulley.

    Modifica

  7. Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: passo 6, immagine 1 di 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: passo 6, immagine 2 di 3 Wacker Compactor Plate VP1550AW 2014 V-Belt Replacement: passo 6, immagine 3 di 3

    • Replacing the belt poses a substantial pinching hazard. Wear safety gloves and be mindful where you position your fingers.

    • Guide the belt over the top of the clutch pulley.

    • Loop the belt underneath the pulley axle.

    • Rotate the pulley slowly and guide the built into the groove.

    • Getting the replacement belt back onto the drive pulley requires considerable strength.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Arthur Shi

Membro da: 01/03/18

254.032 Reputazione

529 Guide realizzate

Distintivi: 47

+44 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

17.259 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 33

Tutti i Tempi: 3,009