Vornado 133 Compact Air Circulator Fan Blade Replacement

Introduzione

If the fan blades of the Vornado 133 are dirty or become damaged, it may be necessary to remove them for cleaning or replacement. This guide will detail how to remove the front grill in order to access the blades, as well as how to remove and replace the blades themselves.

Cosa ti serve

Passo 1 Grill Cover

Vornado 133 Compact Air Circulator Fan Blade Replacement, Grill Cover: passo 1, immagine 1 di 3

Vornado 133 Compact Air Circulator Fan Blade Replacement, Grill Cover: passo 1, immagine 2 di 3

Vornado 133 Compact Air Circulator Fan Blade Replacement, Grill Cover: passo 1, immagine 3 di 3

Use a #1 Phillips screwdriver to remove the four 3mm screws.
It may be difficult to reach the bottom two screws; tilt the fan housing straight upwards for easier access.

Modifica

Passo 2

Once the screws are removed, turn the fan back over. Use your hands to pull the front grill cover off.

Modifica

Passo 3 Fan Blades

Vornado 133 Compact Air Circulator Fan Blade Replacement, Fan Blades: passo 3, immagine 1 di 3

Vornado 133 Compact Air Circulator Fan Blade Replacement, Fan Blades: passo 3, immagine 2 di 3

Vornado 133 Compact Air Circulator Fan Blade Replacement, Fan Blades: passo 3, immagine 3 di 3

Turn the center nut on the blade shaft clockwise to remove the nut, then remove the blades.
The nut is removed by turning clockwise, rather than the normal counterclockwise.

Modifica