Aggiusta la tua roba ComunitĂ  Store

Voluas VL001 Silicone Hopper Feeder Replacement

Introduzione

If your Voluas VL001 pet feeder is having problems with getting food out, you may have an issue with your feeder mechanism. This is the part that has a fan-like shape and rotates to dispense food out of the device.

Cosa ti serve

  1. Voluas VL001 Silicone Hopper Feeder Replacement, Storage Tank: passo 1, immagine 1 di 3 Voluas VL001 Silicone Hopper Feeder Replacement, Storage Tank: passo 1, immagine 2 di 3 Voluas VL001 Silicone Hopper Feeder Replacement, Storage Tank: passo 1, immagine 3 di 3

    • Remove the lid to the storage tank by using the latch and lifting off.

    • Grab the food storage tank on both sides. Depress the tabs that say "Push" on them and lift the tank off.

    Traduci

  2. Voluas VL001 Silicone Hopper Feeder Replacement, Silicone Hopper Feeder: passo 2, immagine 1 di 3 Voluas VL001 Silicone Hopper Feeder Replacement, Silicone Hopper Feeder: passo 2, immagine 2 di 3 Voluas VL001 Silicone Hopper Feeder Replacement, Silicone Hopper Feeder: passo 2, immagine 3 di 3

    • Grab the spindle from the bottom.

    • This will prevent the feeder from spinning while you loosen the screw.

    • Using a Phillips #2 screwdriver, remove the single 11.6 mm screw in the center of the topside of the feeder mechanism.

    • Once the screw is removed, grab the three-pronged silicone agitator and remove it from the feeder.

    Traduci

  4. Voluas VL001 Silicone Hopper Feeder Replacement: passo 3, immagine 1 di 3 Voluas VL001 Silicone Hopper Feeder Replacement: passo 3, immagine 2 di 3 Voluas VL001 Silicone Hopper Feeder Replacement: passo 3, immagine 3 di 3

    • Flip the storage tank over so that the bottom side is facing up.

    • Using a Phillips #2 screwdriver, remove the three 11.3 mm screws that hold the plastic cap onto the bottom of the tank.

    • Lift the plastic cap off the tank.

    Traduci

  5. Voluas VL001 Silicone Hopper Feeder Replacement: passo 4, immagine 1 di 2 Voluas VL001 Silicone Hopper Feeder Replacement: passo 4, immagine 2 di 2

    • Firmly grab the spindle of the mechanism and remove it from the bottom of the tank.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un commento

Do you know where to get a replacement part? They say they don’t sell them.

Abigail Donnolly - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 96