Salta al contenuto principale

Introduzione

This guide provides the instructions needed to remove the motherboard from the 781HD DVR camcorder.

Ricambi

Nessuna parte specificata.

  1. Vivitar DVR 781HD Motherboard Replacement, Front Case: passo 1, immagine 1 di 3 Vivitar DVR 781HD Motherboard Replacement, Front Case: passo 1, immagine 2 di 3 Vivitar DVR 781HD Motherboard Replacement, Front Case: passo 1, immagine 3 di 3
    • Begin with the camcorder lens up on a clear working surface.

    • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

  2. Vivitar DVR 781HD Motherboard Replacement: passo 2, immagine 1 di 1
    • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

  3. Vivitar DVR 781HD Motherboard Replacement: passo 3, immagine 1 di 3 Vivitar DVR 781HD Motherboard Replacement: passo 3, immagine 2 di 3 Vivitar DVR 781HD Motherboard Replacement: passo 3, immagine 3 di 3
    • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

    • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

  4. Vivitar DVR 781HD Motherboard Replacement, Motherboard: passo 4, immagine 1 di 2 Vivitar DVR 781HD Motherboard Replacement, Motherboard: passo 4, immagine 2 di 2
    • Using a P1 screwdriver, remove the 4mm screws holding the motherboard into the case.

  5. Vivitar DVR 781HD Motherboard Replacement: passo 5, immagine 1 di 1
    • Gently lift the motherboard, handling it by the edges.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Nathan McDaniel

Membro da: 13/02/2016

564 Reputazione

3 Guide realizzate

Team

IUPUI, Team 54-6, Wilson Spring 2016 Membro di IUPUI, Team 54-6, Wilson Spring 2016

IUPUI-WILSON-S16S54G6

3 Membri

10 Guide realizzate

2 Commenti

It says no parts required, but it is instructions to replace the motherboard.

There is nothing about getting another motherboard, and how much.

Heki Kahni - Replica

How do you get a motherboard?

Rdam Russell - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 13

Tutti i Tempi: 1,282