Salta al contenuto principale

Ricambi

Nessuna parte specificata.

  1. Vivitar DVR 781HD Front Case Replacement, Front Case: passo 1, immagine 1 di 3 Vivitar DVR 781HD Front Case Replacement, Front Case: passo 1, immagine 2 di 3 Vivitar DVR 781HD Front Case Replacement, Front Case: passo 1, immagine 3 di 3
    • Begin with the camcorder lens up on a clear working surface.

    • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

  2. Vivitar DVR 781HD Front Case Replacement: passo 2, immagine 1 di 1
    • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

  3. Vivitar DVR 781HD Front Case Replacement: passo 3, immagine 1 di 3 Vivitar DVR 781HD Front Case Replacement: passo 3, immagine 2 di 3 Vivitar DVR 781HD Front Case Replacement: passo 3, immagine 3 di 3
    • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

    • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jordan Baum

Membro da: 13/02/2016

352 Reputazione

2 Guide realizzate

Team

IUPUI, Team 54-6, Wilson Spring 2016 Membro di IUPUI, Team 54-6, Wilson Spring 2016

IUPUI-WILSON-S16S54G6

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 223