Aggiusta la tua roba Comunità Store

VTech Kidizoom Smartwatch DX2 Motherboard Replacement

Introduzione

In order to remove the screen or the battery, the main board will have to be removed first. Follow this guide to set you on your way.

Cosa ti serve

  1. VTech Kidizoom Smartwatch DX2 Motherboard Replacement, Master Switch: passo 1, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Motherboard Replacement, Master Switch: passo 1, immagine 2 di 2

    • Begin by flipping the watch over with its back facing upwards.

    Modifica

  2. VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 2, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 2, immagine 2 di 2

    • Next, use the Phillips #00 screwdriver to unscrew the four 6.0 mm screws located in each corner of the watch to remove the backplate.

    Modifica

  3. VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 3, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 3, immagine 2 di 2

    • Gently lift the backplate up to remove it.

    Modifica

  5. VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 4, immagine 1 di 3 VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 4, immagine 2 di 3 VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 4, immagine 3 di 3

    • After removing the backplate, lift the master switch up from the circuit board.

    Modifica

  6. VTech Kidizoom Smartwatch DX2 Motherboard Replacement, Motherboard: passo 5, immagine 1 di 1

    • Using a Phillips #00 screwdriver, remove the 0.6 mm screw.

    Modifica

  7. VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 6, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 6, immagine 2 di 2

    • Carefully remove the speaker from the case without disconnecting it from the motherboard.

    Modifica

  8. VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 7, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Motherboard Replacement: passo 7, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Using the tweezers, carefully lift the bar holding the connection to the screen.

    • Remove the motherboard from the device.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Jessica Richard

Membro da: 10/25/18

512 Reputazione

4 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Membro di UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 Membri

7 Guide realizzate

2 Commenti

This shows how to take the motherboard out, but how to I get a replacement motherboard? I don’t see anywhere that I can purchase one…

ltiede12 - Replica

I’m interested in the components on the motherboard. What type of SOC does it use, what operating system, etc…

Asher Kobin - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 29

Tutti i Tempi: 3,613