Salta al contenuto principale

VTech Kidizoom Smartwatch DX2 Master Switch Replacement

Cosa ti serve

  1. VTech Kidizoom Smartwatch DX2 Master Switch Replacement, Master Switch: passo 1, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Master Switch Replacement, Master Switch: passo 1, immagine 2 di 2
    • Begin by flipping the watch over with its back facing upwards.

  2. VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 2, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 2, immagine 2 di 2
    • Next, use the Phillips #00 screwdriver to unscrew the four 6.0 mm screws located in each corner of the watch to remove the backplate.

  3. VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 3, immagine 1 di 2 VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 3, immagine 2 di 2
    • Gently lift the backplate up to remove it.

  4. VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 4, immagine 1 di 3 VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 4, immagine 2 di 3 VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 4, immagine 3 di 3
    • After removing the backplate, lift the master switch up from the circuit board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Sydney

Membro da: 10/25/18

344 Reputazione

2 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,953