Salta al contenuto principale

VTech Baby's Learning Laptop Buttons Replacement

Cosa ti serve

  1. VTech Baby's Learning Laptop Buttons Replacement, Battery and Rear Panel: passo 1, immagine 1 di 1
    • To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.

    • A coin can also be used to loosen the screw.

  2. VTech Baby's Learning Laptop Buttons Replacement: passo 2, immagine 1 di 1
    • Remove the battery door.

    • Take out the batteries.

  3. VTech Baby's Learning Laptop Buttons Replacement: passo 3, immagine 1 di 1
    • Remove the rear panel screws using a Phillips #2 screwdriver.

    • Two 21.6mm (Long)

    • One 9.8mm (Short)

    • Five 13.8mm (Medium)

  4. VTech Baby's Learning Laptop Buttons Replacement: passo 4, immagine 1 di 2 VTech Baby's Learning Laptop Buttons Replacement: passo 4, immagine 2 di 2
    • Gently pull up on the rear panel.

    • Be careful not to pull on the wire connections.

    • Rest the laptop open on the table.

  5. VTech Baby's Learning Laptop Buttons Replacement, Buttons: passo 5, immagine 1 di 1
    • Using a Phillips #0 screwdriver remove the two 6.0mm screws.

  6. VTech Baby's Learning Laptop Buttons Replacement: passo 6, immagine 1 di 2 VTech Baby's Learning Laptop Buttons Replacement: passo 6, immagine 2 di 2
    • Lift up on the board and set it aside.

    • Movement of the board will be limited. Be careful not to damage the connection to the motherboard.

  7. VTech Baby's Learning Laptop Buttons Replacement: passo 7, immagine 1 di 1
    • Remove each button and button contact.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

USF Tampa, Team 12-2, Blackwell Fall 2015 Membro di USF Tampa, Team 12-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G2

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 12

Tutti i Tempi: 827