Aggiusta la tua roba Comunità Store

Using a Floor Jack

Cosa ti serve

  1. Using a Floor Jack, Using a Floor Jack: passo 1, immagine 1 di 2 Using a Floor Jack, Using a Floor Jack: passo 1, immagine 2 di 2

    • Place the hydraulic floor jack under the vehicle until the saddle is directly under the crossmember.

    • The crossmember is the long metal support beam that runs underneath from the front fender to the rear fender on both sides of the car.

    • The saddle is the round metal part of the jack that moves upward as you pump the jack up.

    Traduci

  2. Using a Floor Jack, Using floor jack to lift car.: passo 2, immagine 1 di 1

    • Push downward on the jack's lever to lift the saddle upward so that it contacts the crossmember. Continue pushing downward on the lever to lift the car upward.

    Traduci

  4. Using a Floor Jack: passo 3, immagine 1 di 1

    • Place the jack stand under the jack mounting point.

    • The jack mounting point is a metallic protrusion beneath each of the car doors.

    Traduci

  5. Using a Floor Jack: passo 4, immagine 1 di 1

    • Raise the jack stand until it contacts the jack mounting point.

    • In the event the floor jack fails, the jack stand is designed to prevent the car from falling.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

Shaun MacDonald

Membro da: 10/03/12

2.558 Reputazione

8 Guide realizzate

Distintivi: 15

+12 altri distintivi

Team

Cal Poly, Team 24-27, Regan Fall 2012 Membro di Cal Poly, Team 24-27, Regan Fall 2012

CPSU-REGAN-F12S24G27

4 Membri

22 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 52

Ultimi 30 Giorni: 211

Tutti i Tempi: 39,997