Salta al contenuto principale

Introduzione

The Brother HL-5240 printer comes standard with 16 megabytes of memory. The following steps can be followed to add more memory. Up to 528 MB of ram can be added.

  1. Flip the power switch to the off position by pressing the side of the button with an "O" symbol. Unplug the printer's cord from the wall socket.
    • Flip the power switch to the off position by pressing the side of the button with an "O" symbol.

    • Unplug the printer's cord from the wall socket.

  2. Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now

    Kit riparazione batterie MacBook

    A partire da $69.99

    Buy Now
  3. Locate the small removable panel on the left side of the printer. Press the tab at the top of the panel. Pull the panel open.
    • Locate the small removable panel on the left side of the printer.

    • Press the tab at the top of the panel.

    • Pull the panel open.

    • Pull the old RAM out of its slot and insert the new RAM in its place.

Linea Traguardo

Un'altra persona ha completato questa guida.

Clint Sorensen

Membro da: 13/01/2010

41 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 4-14, Forte Winter 2010 Membro di Cal Poly, Team 4-14, Forte Winter 2010

CPSU-FORTE-W10S4G14

5 Membri

5 Guide realizzate

I want a way to treat the blurry picture

mahmoud22365 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 3,138