Aggiusta la tua roba Comunità Store

Unsticking SteelSeries Nimbus Triggers

Cosa ti serve

  1. Unsticking SteelSeries Nimbus Triggers, Unsticking SteelSeries Nimbus Triggers: passo 1, immagine 1 di 1

    • When your triggers get stickier than the Cheeto® dust on your hands it might be time for an intervention.

    Traduci

  2. Unsticking SteelSeries Nimbus Triggers: passo 2, immagine 1 di 2 Unsticking SteelSeries Nimbus Triggers: passo 2, immagine 2 di 2

    • Start off by removing the four TR9 Torx Security screws on the back of the controller.

    Traduci

  3. Unsticking SteelSeries Nimbus Triggers: passo 3, immagine 1 di 3 Unsticking SteelSeries Nimbus Triggers: passo 3, immagine 2 di 3 Unsticking SteelSeries Nimbus Triggers: passo 3, immagine 3 di 3

    • The two screws on the top are further inset than the others. You can use the iFixit 1/4" to 4 mm Driver Adapter as an extender.

    Traduci

  5. Unsticking SteelSeries Nimbus Triggers: passo 4, immagine 1 di 2 Unsticking SteelSeries Nimbus Triggers: passo 4, immagine 2 di 2

    • The case is now open, but it's still held together by two clips on the top.

    Traduci

  6. Unsticking SteelSeries Nimbus Triggers: passo 5, immagine 1 di 3 Unsticking SteelSeries Nimbus Triggers: passo 5, immagine 2 di 3 Unsticking SteelSeries Nimbus Triggers: passo 5, immagine 3 di 3

    • Apply a gentle twisting motion to separate the first clip.

    • Twist in the other direction to separate the second clip.

    • The top is now free!

    Traduci

  7. Unsticking SteelSeries Nimbus Triggers: passo 6, immagine 1 di 3 Unsticking SteelSeries Nimbus Triggers: passo 6, immagine 2 di 3 Unsticking SteelSeries Nimbus Triggers: passo 6, immagine 3 di 3

    • Be mindful of the three cables still connecting the two halves.

    Traduci

  8. Unsticking SteelSeries Nimbus Triggers: passo 7, immagine 1 di 2 Unsticking SteelSeries Nimbus Triggers: passo 7, immagine 2 di 2

    • Here's our problem, the rubber pad has fallen off of the plastic stop leaving only the glue behind.

    • The rubber pad should still be in the controller somewhere (happy hunting) or if you're not in the mood for hide and seek any kind of foam will work as a replacement.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Jonathan

Membro da: 03/13/13

464 Reputazione

2 Guide realizzate

Distintivi: 8

+5 altri distintivi

4 Commenti

Great, concise fix instructions!

Brian Pippen - Replica

My nimbus started to have sticky triggers. I could not believe that I had found this solution! Awesome!

Max-Heinrich Laves - Replica

Hi, I have a Nimbus + controller. It's seems to have clips at the back too. Any advice on how to open it?

Sean Hudson - Replica

Greetings, someone who can help me where I can get the joystick, original remote control ?

Excellent information

bryan Andino - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 5

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 39

Tutti i Tempi: 6,125