1. Place the phone facedown on a cleared work area
    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

    Aggiungi Commento

  2. Grip the top right corner of the battery.
    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

    Aggiungi Commento

    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

    Aggiungi Commento

    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

    Aggiungi Commento

    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

    Aggiungi Commento

    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

    Aggiungi Commento

    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

    Aggiungi Commento

    • Set aside the circuit board from the screen protector.

    Aggiungi Commento

    • Peel back the speaker using fine-tipped tweezers

    • Use caution when removing the earpiece speaker

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 43