Place the phone facedown on a cleared work area
  • Place the phone facedown on a cleared work area

  • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

Aggiungi Commento

Grip the top right corner of the battery.
  • Grip the top right corner of the battery.

  • Remove the battery by pulling it outwards.

Aggiungi Commento

  • Remove the four screws on the back of the phone using a Philips 000 screwdriver

Aggiungi Commento

  • Separate the frame evenly using a plastic opening tool.

  • Be careful, as the frame is thin and can break easily.

Aggiungi Commento

  • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

Aggiungi Commento

  • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

Aggiungi Commento

  • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

  • The white circuit is flimsy and securely glued to the frame.

Aggiungi Commento

  • Set aside the circuit board from the screen protector.

Aggiungi Commento

  • Replace the old plastic screen with the new one.

  • Reassemble the phone by following the steps in reverse order.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 44