Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will show readers how to diagnose a faulty Water Heater element. It will also explain how to replace the complete Water Heater.
Cosa ti serve
-
-
At the breaker box, locate the breaker to the water heater and move the breaker bar to off.
-
Using a multimeter, check the line voltage at the water heater. You should have 0vac
-
-
-
-
Attach a garden hose (or any hose) to the drain valve that is located at the bottom of tank, near the lower access panel.
-
Open the drain valve on water heater. Once you have good water pressure coming out of the hose, slowly close the cold water valve to the water heater. If the water flowing out slows down, you can open the faucets at a sink or tub.
-
To install a new water heater, follow the installation instructions that came with the new water heater.
To install a new water heater, follow the installation instructions that came with the new water heater.
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.
Un commento
If you have enough assistance to transport the unit outside the house, taking apart an old water heater is simple. Components, mounting hardware, and other aspects of a water heater can all be removed independently. Nonetheless, it takes strength to pull the old water from its place and move it outside for proper disposal.