Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

  1. Use an opening tool to pry off the lid of  the memory card compartment.
    • Use an opening tool to pry off the lid of the memory card compartment.

  2. Use a Phillips #00 Screwdriver to unscrew the two 1.2mm screws within the compartment. This allows the device to be opened.
    • Use a Phillips #00 Screwdriver to unscrew the two 1.2mm screws within the compartment. This allows the device to be opened.

  3. Insert opening tools to partially pry open the cover. Insert opening tools to partially pry open the cover.
    • Insert opening tools to partially pry open the cover.

  4. With the cover being partially held open, slide a spudger around the seam to pry off the cover.
    • With the cover being partially held open, slide a spudger around the seam to pry off the cover.

  5. Remove the tape that is holding the battery in place.
    • Remove the tape that is holding the battery in place.

  6. Unscrew the five 1.2mm screws that connect  the circuit board to the device.
    • Unscrew the five 1.2mm screws that connect the circuit board to the device.

  7. There are three silver tabs around the internal components that connect it to the frame with screws. Unscrew these screws to remove the internal components.
    • There are three silver tabs around the internal components that connect it to the frame with screws. Unscrew these screws to remove the internal components.

  8. Carefully lift the internal components from the screen and place them into a replacement screen.
    • Carefully lift the internal components from the screen and place them into a replacement screen.

Conclusione

To reassemble your device, follow instructions 1-7 in reverse order.

Altre 2 persone hanno completato questa guida.

Evan Peterson

Membro da: 08/03/2017

320 Reputazione

2 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,298