Aggiusta la tua roba Comunità Store

UE BOOM 2 Speaker Replacement

Introduzione

This guide will show how the speaker of the UE Boom 2 is removed. This is an extensive and intrusive process which removes most components of the speaker.

Cosa ti serve

  1. UE BOOM 2 Speaker Replacement, Speaker: passo 1, immagine 1 di 3 UE BOOM 2 Speaker Replacement, Speaker: passo 1, immagine 2 di 3 UE BOOM 2 Speaker Replacement, Speaker: passo 1, immagine 3 di 3

    • Remove the D-ring located at the bottom of the device, opposite end of the power button.

    • Remove by twisting in a counter-clockwise motion.

    • Removing the D-ring will allow you to be able to remove the rubber port cover revealing the headphone jack and charging port.

    Modifica

  2. UE BOOM 2 Speaker Replacement: passo 2, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 2, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 2, immagine 3 di 3

    • Remove the rubber stripping using a metal spudger.

    • Work around the edge of the rubber stripping slowly prying up the edge.

    Modifica

  3. UE BOOM 2 Speaker Replacement: passo 3, immagine 1 di 1

    • Continue removing the rubber stripping down the side.

    Modifica

  4. UE BOOM 2 Speaker Replacement: passo 4, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 4, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 4, immagine 3 di 3

    • On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 screwdriver.

    • Pry up at the location marked, and remove the plastic end cap.

    • Repeat these steps on the top of the speaker.

    Modifica

  5. UE BOOM 2 Speaker Replacement: passo 5, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 5, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 5, immagine 3 di 3

    • Carefully un-loop the cable and unplug from motherboard.

    • Pull out the battery, and handle with care.

    Modifica

  6. UE BOOM 2 Speaker Replacement: passo 6, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 6, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 6, immagine 3 di 3

    • Using the metal spudger, pry up the plastic tab on the inside.

    • Pry up around the entire inside circumference.

    • Repeat on the other end.

    Modifica

  8. UE BOOM 2 Speaker Replacement: passo 7, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 7, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 7, immagine 3 di 3

    • Using the metal spudger tool, pry up the inside edge of the mesh lining.

    • Working down the strip on both sides. Careful as to not rip the mesh.

    Modifica

  9. UE BOOM 2 Speaker Replacement: passo 8, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 8, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 8, immagine 3 di 3

    • Unscrew the two 5mm Phillips Head #1 screws, using a Phillips Head #1 screwdriver.

    • Using the metal spudger, pry open the edge of the cover.

    Modifica

  10. UE BOOM 2 Speaker Replacement: passo 9, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 9, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 9, immagine 3 di 3

    • Using the metal spudger, pry the plastic casing up.

    • Repeat on the other side of the speaker.

    Modifica

  11. UE BOOM 2 Speaker Replacement: passo 10, immagine 1 di 2 UE BOOM 2 Speaker Replacement: passo 10, immagine 2 di 2

    • Pull each cover off.

    Modifica

  12. UE BOOM 2 Speaker Replacement: passo 11, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 11, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 11, immagine 3 di 3

    • Using the metal spudger, specifically the pointy end, find the gap between the speaker and billow (the large speaker-like object next to the speaker).

    • Pry the metal wire up and out at exactly this gap, then slide down wire towards one end to pop it out completely.

    • Once one end is out, use fingers to gently pull off completely, so as not to bend the wire to aggressively.

    Modifica

  13. UE BOOM 2 Speaker Replacement: passo 12, immagine 1 di 1

    • Repeat previous process for other side of the speaker and billow.

    Modifica

  14. UE BOOM 2 Speaker Replacement: passo 13, immagine 1 di 2 UE BOOM 2 Speaker Replacement: passo 13, immagine 2 di 2

    • Using the metal spudger, work it under the billow (circled).

    • Work the billow up around all edges, and pull out of casing.

    Modifica

  15. UE BOOM 2 Speaker Replacement: passo 14, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 14, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 14, immagine 3 di 3

    • With the billow removed, pry up the pink rubber seal with the metal spudger, and remove.

    • Do not use excessive force with the metal spudger, doing so may damage the seal.

    Modifica

  16. UE BOOM 2 Speaker Replacement: passo 15, immagine 1 di 3 UE BOOM 2 Speaker Replacement: passo 15, immagine 2 di 3 UE BOOM 2 Speaker Replacement: passo 15, immagine 3 di 3

    • Now, begin to use the same technique for the speaker.

    • Be sure to remove the speaker slowly, as there is a cable attaching the speaker to the motherboard.

    Modifica

  17. UE BOOM 2 Speaker Replacement: passo 16, immagine 1 di 2 UE BOOM 2 Speaker Replacement: passo 16, immagine 2 di 2

    • Once speaker is detached from casing, remove cable from motherboard.

    • Connect new speaker by attaching the cable to the same place where the old speaker was just taken out of.

    • If both speakers are blown out, repeat steps 14-16 on the other side.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 11 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Keegan Divine

Membro da: 01/18/18

568 Reputazione

1 Guida realizzata

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team S12-G5, Banghart Winter 2018 Membro di Cal Poly, Team S12-G5, Banghart Winter 2018

CPSU-BANGHART-W18S12G5

2 Membri

15 Guide realizzate

10 Commenti

Hi, very good tutorial, you got your 30 points ! ;)

But the main question remains to me : where to get a new speaker as UE doen’t sell spare parts and I don’t find any replacement on internet … any help more than welcome …

Cheers!

Francois ORSERO - Replica

did you managed to source a replacement speaker? im having the same problem

marleybetteridge -

Still did not find replacement … what about you guys ?

Francois ORSERO -

Check my update you may not have to buy a replacement

Kyle White -

Check with a multimeter if the speakers are actually faulty. Mine were fine, turns out another component broke off and so I soldered it back on. Now it works fine.

Stig -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 31

Ultimi 30 Giorni: 133

Tutti i Tempi: 15,210