Aggiusta la tua roba Comunità Store

Turtle Beach PX22 Speaker Replacement

Introduzione

This guide shows how to replace an ineffective or broken speaker in a Turtle Beach PX22 headset. Soldering skills are needed for this job.

Cosa ti serve

  1. Turtle Beach PX22 Speaker Replacement, Speaker: passo 1, immagine 1 di 1

    • Use your fingers to peel off ear cushion by pinching and pulling off the leather.

    Modifica

  3. Turtle Beach PX22 Speaker Replacement: passo 2, immagine 1 di 2 Turtle Beach PX22 Speaker Replacement: passo 2, immagine 2 di 2

    • Use a Phillips #00 head screwdriver to remove the three screws located around the speaker (9/32 in length, 1/8 inch head).

    • The housing will come loose. Take note of the position of the wires connected to the speaker.

    Modifica

  4. Turtle Beach PX22 Speaker Replacement: passo 3, immagine 1 di 1

    • Desolder the colored wire and copper wires.

    Modifica
Linea Traguardo

Altre 6 persone hanno completato questa guida.

2 Commenti

Does the speaker driver separate from the surrounding plastic disk, so it can be replaced with a like-sized driver, or is the driver plus mounting plate assembly sold as a replacement part?

Michael Merrell - Replica

Where can a new speaker be purchased? It says that there are no parts required but in step 3 it says to have a new speaker. I can't find this online.

jn8ion - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 15

Tutti i Tempi: 3,754