Salta al contenuto principale

Turtle Beach Elite Pro Ear Cushions Replacement

Cosa ti serve

  1. Turtle Beach Elite Pro Ear Cushions Replacement, Ear Cushions: passo 1, immagine 1 di 1
    • Firmly pinch ear cushion between thumb and forefinger.

    • Using the hand not holding the ear cushion, grasp the orange plate that is below the ear cushion.

    • If the black rubber lining on the orange plate is grasped, then the rubber lining on the ear piece may tear.

  2. Turtle Beach Elite Pro Ear Cushions Replacement: passo 2, immagine 1 di 2 Turtle Beach Elite Pro Ear Cushions Replacement: passo 2, immagine 2 di 2
    • Rotate ear cushion counter-clockwise about half an inch.

    • The ear cushion should audibly snap out of place.

    • After it has audibly snapped out of place, lift the ear cushion off of the device.

    • During reassembly, rotate the ear cushion clockwise.

  3. Turtle Beach Elite Pro Ear Cushions Replacement: passo 3, immagine 1 di 2 Turtle Beach Elite Pro Ear Cushions Replacement: passo 3, immagine 2 di 2
    • Using the new cushion, align the pegs located on both the orange plate and ear cushion.

    • Make sure that both the ear cushion and the orange plate have the same designation.

    • Once the pegs are aligned, push the new ear cushion in place.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Baylor, Team S5-G1, Williams Spring 2017 Membro di Baylor, Team S5-G1, Williams Spring 2017

BU-WILLIAMS-S17S5G1

3 Membri

8 Guide realizzate

Un commento

Any recommendations as to where you can get replacements please?

John Gallacher - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 15

Tutti i Tempi: 2,672