Salta al contenuto principale

Turtle Beach Ear Force XO One Speaker Replacement

Cosa ti serve

  1. Turtle Beach Ear Force XO One Speaker Replacement, Speaker: passo 1, immagine 1 di 1
    • Start with the ear padding facing up.

  2. Turtle Beach Ear Force XO One Speaker Replacement: passo 2, immagine 1 di 3 Turtle Beach Ear Force XO One Speaker Replacement: passo 2, immagine 2 di 3 Turtle Beach Ear Force XO One Speaker Replacement: passo 2, immagine 3 di 3
    • Remove the ear padding by separating the fabric piece from the plastic headphone piece.

    • The leather padding will slide off the plastic piece holding it in place. Don't be afraid to pull with a little force.

  3. Turtle Beach Ear Force XO One Speaker Replacement: passo 3, immagine 1 di 2 Turtle Beach Ear Force XO One Speaker Replacement: passo 3, immagine 2 di 2
    • Use a Philips head screwdriver to remove the speaker cover.

    • Be careful the speaker is attached to the chip inside by wires.

    • The recommended screwdriver bit size is a PH 0.

    • Once the speaker cover is removed, the wires can be cut or de-soldered.

    • Remove the speaker.

    • Insert the new speaker

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

UMass Dartmouth, Team 3-1, Shastany Fall 2015 Membro di UMass Dartmouth, Team 3-1, Shastany Fall 2015

UMASSD-SHASTANY-F15S3G1

3 Membri

6 Guide realizzate

Un commento

what speaker can i use as a replacement and where can I buy one?

Tristan Williams - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,789