Salta al contenuto principale

Trio Stealth Pro 9.7" Rear/Front Camera Replacement

Cosa ti serve

  1. Trio Stealth Pro 9.7" Rear/Front Camera Replacement, Rear/Front Camera: passo 1, immagine 1 di 1
    • Remove 2 black 4 cm Phillips screws on either side of the bottom of the device.

  2. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 2, immagine 1 di 2 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 2, immagine 2 di 2
    • Use the plastic opening tools and the spudger around the outside of silver metal back plate on the device to pry off the back plate.

  3. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 3, immagine 1 di 3 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 3, immagine 2 di 3 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 3, immagine 3 di 3
    • Use plastic opening tool to lift up black clip.

    • Gently pull out flex cable.

  4. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 4, immagine 1 di 1
    • Remove 3 silver 4 cm Phillips screws holding down black plastic speaker cover.

    • Gently pull up on plastic to uncover clip connected to the camera.

  5. Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 5, immagine 1 di 2 Trio Stealth Pro 9.7" Rear/Front Camera Replacement: passo 5, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra
    • Use the tweezers and gently lift up on the clip.

    • Remove the front/rear camera.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 165