Aggiusta la tua roba Comunità Store

Tribit XSound Go TS-BTS20 Speaker Replacement

Introduzione

Is your Tribit Xsound Go speaker sounding grainy or low? The water, dirt, or even rust may cause a replacement for the speaker driver for a much clear and transparent sound. The following steps are easy to follow.

Cosa ti serve

  1. Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: passo 1, immagine 1 di 2 Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: passo 1, immagine 2 di 2

    • Insert a spudger in the seam between the front speaker grill and chassis.

    • Pry around the perimeter until the front grill releases.

    • Remove the front grill.

    Modifica

  3. Tribit XSound Go TS-BTS20 Speaker Replacement: passo 2, immagine 1 di 2 Tribit XSound Go TS-BTS20 Speaker Replacement: passo 2, immagine 2 di 2

    • Remove the 14 Phillips screws around the perimeter of the speaker.

    Modifica

  4. Tribit XSound Go TS-BTS20 Speaker Replacement: passo 3, immagine 1 di 3 Tribit XSound Go TS-BTS20 Speaker Replacement: passo 3, immagine 2 di 3 Tribit XSound Go TS-BTS20 Speaker Replacement: passo 3, immagine 3 di 3

    • Disconnect both wires connected to speakers and motherboard.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 42

Tutti i Tempi: 144