Pericolo
Potenzialmente Pericoloso
Possibilità di infortunio se questa procedura non viene seguita correttamente. Prestare attenzione e seguire tutte le avvertenze.
Pericolo

Introduzione

If you need to swap out your brake cable, this will help you replace it safely.

Parti

Nessuna parte richiesta.

  1. Unscrew the screw holding the brake cable in place with a 5mm allen wrench and pull out the cable. Unscrew the screw holding the brake cable in place with a 5mm allen wrench and pull out the cable.
    • Unscrew the screw holding the brake cable in place with a 5mm allen wrench and pull out the cable.

  2. Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable. Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable. Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable.
    • Unscrew the slotted brake cable cap on the rear tire and pull out the cable. Remove the cap from the cable.

  3. Spedizione gratuita per tutti gli ordini superiori a 100,00 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio

    Mai riparato qualcosa? Questo è Genio.

    Condividi la tua storia di riparazione con #ImAGenius

    Siamo tutti Geni

    Condividi la tua storia di riparazione con #ImAGenius

  4. Unscrew the cap next to the brake handle and remove it from the cable. Unscrew the cap next to the brake handle and remove it from the cable.
    • Unscrew the cap next to the brake handle and remove it from the cable.

  5. Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable). Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable). Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable).
    • Pull up and out on the cable to remove the barrel nipple (the small cylinder at the end of the cable).

  6. Unscrew the bracket located on the front tire with a 3mm allen wrench. Rotate the bracket 90 degrees or until the opening is large enough for the cable. Remove the cable. Note that if removing cable for rear brake, rather than unscrewing a bracket, you will unclip several "spring" clips. Keep track of clips.
    • Unscrew the bracket located on the front tire with a 3mm allen wrench.

    • Rotate the bracket 90 degrees or until the opening is large enough for the cable. Remove the cable.

    • Note that if removing cable for rear brake, rather than unscrewing a bracket, you will unclip several "spring" clips. Keep track of clips.

Conclusione

To place the new cable, follow these instructions in reverse order.

Ben Hartinger

Membro da: 27/01/2014

340 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 1-37, Maness Winter 2014 Membro di Cal Poly, Team 1-37, Maness Winter 2014

CPSU-MANESS-W14S1G37

4 Membri

6 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 259