Introduzione

Warning:

You can disassemble the instrument cluster for a neater solution, however beware, the buzzer is linked to the ECU so any electrical circuit modifications like actually disconnecting the buzzer could lead to a ECU malfunction.

Parti

Nessuna parte richiesta.

  1. Start by removing the hood over the instrument cluster. Pull the hood straight out towards the steering wheel.
    • Start by removing the hood over the instrument cluster. Pull the hood straight out towards the steering wheel.

    Aggiungi Commento

  2. Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
    Diffondi allegria Fixmas
    Ottieni $12 sul tuo acquisto di $50 o più con il codice FIXMAS12
  3. After removing the hood, undo the four screws securing the instrument cluster and pull forward.
    • After removing the hood, undo the four screws securing the instrument cluster and pull forward.

    Aggiungi Commento

    • The buzzer is accessed through a grill in the bottom of the instrument cluster/combination meter. Simply poke a sharp object into the grill and mash up the speaker dome to neutralize the buzzer!

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

bt1993

Membro da: 13/02/2013

345 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 49

Tutti i Tempi: 4,733