Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide demonstrates how to properly remove and replace a Toshiba Tecra 8200 RAM in order to preserve the function of the device.

  1. Turn off the device and unplug the power cord.
    • Turn off the device and unplug the power cord.

    • To remove the battery, flip the device, so that the bottom is facing upward.

  2. Slide the battery to the right side until you hear a click. Carefully remove the battery from its compartment. Carefully remove the battery from its compartment.
    • Slide the battery to the right side until you hear a click.

    • Carefully remove the battery from its compartment.

  3. Position device so the screen is face down.
    • Position device so the screen is face down.

    • Locate RAM Panel.

  4. Remove two Phillips #00 screws labeled F4. Remove panel.
    • Remove two Phillips #00 screws labeled F4.

    • Remove panel.

  5. Pinch clips on each side of RAM chips to release. Gently remove RAM chips at a 45 degree angle. Use a plastic opening tool if RAM chips do not pop open.
    • Pinch clips on each side of RAM chips to release.

    • Gently remove RAM chips at a 45 degree angle. Use a plastic opening tool if RAM chips do not pop open.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sally

Membro da: 17/02/2015

306 Reputazione

3 Guide realizzate

Team

Ohio State, Team 1-3, Buehl Winter 2015 Membro di Ohio State, Team 1-3, Buehl Winter 2015

OSU-BUEHL-W15S1G3

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 211