Aggiusta la tua roba Comunità Store

Toshiba TDP-XP2 Fuse Replacement

Introduzione

In the rare case of a power surge, if the device is not plugged into a surge protecting outlet, the fuse will blow out and need to be replaced. This guide will show how to tear the whole projector down to get the fuse and replace it.

Cosa ti serve

  1. Toshiba TDP-XP2 Fuse Replacement, Fuse: passo 1, immagine 1 di 3 Toshiba TDP-XP2 Fuse Replacement, Fuse: passo 1, immagine 2 di 3 Toshiba TDP-XP2 Fuse Replacement, Fuse: passo 1, immagine 3 di 3

    • Start by removing the two screws on the bottom of the device as shown.

    Modifica

  2. Toshiba TDP-XP2 Fuse Replacement: passo 2, immagine 1 di 2 Toshiba TDP-XP2 Fuse Replacement: passo 2, immagine 2 di 2

    • Remove the top plastic cover from the device. The back is snapped on so it would help to have leverage from a prying tool.

    • Remove the ribbon cable attached to the plastic piece just removed. Remember its orientation for re-assembling later.

    Modifica

  3. Toshiba TDP-XP2 Fuse Replacement: passo 3, immagine 1 di 3 Toshiba TDP-XP2 Fuse Replacement: passo 3, immagine 2 di 3 Toshiba TDP-XP2 Fuse Replacement: passo 3, immagine 3 di 3

    • Remove the screws from the case located around the device.

    Modifica

  4. Toshiba TDP-XP2 Fuse Replacement: passo 4, immagine 1 di 1

    • Remove the plastic panels from the body.

    Modifica

  6. Toshiba TDP-XP2 Fuse Replacement: passo 5, immagine 1 di 3 Toshiba TDP-XP2 Fuse Replacement: passo 5, immagine 2 di 3 Toshiba TDP-XP2 Fuse Replacement: passo 5, immagine 3 di 3

    • Remove the screws from the IO panel.

    • Pull up on the panel and remove it.

    Modifica

  7. Toshiba TDP-XP2 Fuse Replacement: passo 6, immagine 1 di 2 Toshiba TDP-XP2 Fuse Replacement: passo 6, immagine 2 di 2

    • Unscrew the screws from the metal shielding to remove it.

    Modifica

  8. Toshiba TDP-XP2 Fuse Replacement: passo 7, immagine 1 di 3 Toshiba TDP-XP2 Fuse Replacement: passo 7, immagine 2 di 3 Toshiba TDP-XP2 Fuse Replacement: passo 7, immagine 3 di 3

    • Remove cables from motherboard.

    • Unscrew motherboard and remove from device.

    Modifica

  9. Toshiba TDP-XP2 Fuse Replacement: passo 8, immagine 1 di 1

    • Remove the cable from the bottom of the motherboard to fully remove it.

    Modifica

  10. Toshiba TDP-XP2 Fuse Replacement: passo 9, immagine 1 di 1

    • Unscrew the power adapter on the back.

    Modifica

  11. Toshiba TDP-XP2 Fuse Replacement: passo 10, immagine 1 di 2 Toshiba TDP-XP2 Fuse Replacement: passo 10, immagine 2 di 2

    • Remove cables from the power supply board.

    • Remove the screws located around the board to un-mount it.

    Modifica

  12. Toshiba TDP-XP2 Fuse Replacement: passo 11, immagine 1 di 2 Toshiba TDP-XP2 Fuse Replacement: passo 11, immagine 2 di 2

    • Locate the fuse near where the power adapter was.

    • De-solder the fuse and replace with an equivalent fuse (Fuse leads to de-solder are marked in red).

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Bryan Underwood

Membro da: 04/02/18

697 Reputazione

5 Guide realizzate

Distintivi: 3

Team

University of Memphis, Team S1-G3, Kim Spring 2018 Membro di University of Memphis, Team S1-G3, Kim Spring 2018

UM-KIM-S18S1G3

3 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 334